Amikor a csúcstechnológiás tervezés és a minőség jelentős gazdasági előnyökkel párosul. Soha eddig nem volt még az impulzushegesztés ennyire gyors. A DeepArc eljárás akár 30% csökkentheti a hegesztésre és tisztításra fordított időt míg a ColdMIG eljárás további előnyt jelent a vékony lemezek területén. 


A funkcionalitás új szintjére léptünk az új vezérlőpanellel amely nagy gombokat és Protec-edge védelmet is kapott.


Az újraoptimalizált hegesztőív beállítások fröcskölésmentes hegesztést tesznek lehetővé. Ráadásként a további szoftverfrissítések lehetőségével biztosan megőrízheti versenyképességét a jövőben.

A gépcsalád 10 típusból áll:

HighPULSE 284 K

HighPULSE 354 K

HighPULSE 354 DW

HighPULSE 454 KW & DW

HighPULSE 554 KW & DW

HighPULSE 352 RS

HighPULSE 452 RS

HighPULSE 552 RS

Modern technológia 3 vonalon – Hordozható, ipari és robot!

A HighPULSE termékvonal egyedi kombinációja a teljesítménynek és a nagysebességű hegesztésnek amely egyértelmű gazdaságosságot jelentenek. További előny a TEDAC rendszer használata, amely az összes modellnél elérhető: A hordozható 284/354 K vagy az univerzális, ipari 354/454/554 DW esetén.


A legjobb példa a Merkle innovációs képességére a TEDAC® rendszer, amely fokozatmentes teljesítményszabályozást, visszajelzést vagy akár a JOB-ok közötti váltást. which offers continuous energy control and display directly on the welding torch. This makes it convenient for difficult accessible working areas.

Vitathatatlan előnye HighPULSE sorozatnak az egyszerű kezelés, a kiterjesztett funkciók és a fokozatmentes teljesítményszabályozás a TEDAC® munkakábelről.


HighPULSE – A legjobb technológia a Merkle 50 éves történetében!

A hordozható HighPULSE 284/354 K (opcióként vízhűtővel, kocsin).

Az ipari vonal HighPULSE 354/454/554 DW kerekekkel vagy akár külön előtolóval.

A tökéletes technológia akár automatizáláshoz is!

Termékvonalak és specifikációk

Az alábbi eljárások választhatók:

  • PulseARC impulzushegesztés
  • MIG/MAG hegesztés
  • TIG DC* AWI hegesztés
  • MMA/Bevont elektródás hegesztés
  • Flux cored/Portöltetes huzal hegesztés
  • Interpulse hegesztés
  • DeepARC 
  • HighUP
  • ColdMIG
  • MIG-forrasztás
  • Nagyteljesítményű(forgóíves)hegesztés

* opció

A  3 termékcsoport:

  • 1. Hordozható:
    HighPULSE 284/354 K
  • 2. Ipari:
    HighPULSE 454/554 KW és 
    HighPULSE 354/454/554 DW
  • 3. Automatizáció és robot:
    HighPULSE 352/452/552 RS
  • (nézze meg a részleteket“)

Új, multifunkciós vezérlőpanel a kényelmesebb használatért

1.   Nagy méretű digitális kijelző :

  • hegesztőáram
  • feszültség
  • huzalsebesség
  • anyagvastagság

    
2.    Automatikus "HOLD" funkció
     (megtartja az utolsó mért értékeket)
    
3.    Ívhossz szabályozás
    
4.    Áramerősség beállítása

5.   Használati mód kiválasztása:

  •  2 ütem automatikus lefutással
  •  4 ütem lefutással és végárammal
  • 4 ütem indulóárammal, I2 árammal lefutással és végárammal

     


6.    Szabályozás helyének kiválasztása:

  •  Fokozatmentes szabályozás a frontpanelről
  •  Fokozatmentes szabályozás a huzaltolóról
  •  Fokozatmentes szabályozás a TEDAC® munkakábelen
  •  JOB mód elérhető a TEDAC® munkakábelen vagy a menü gombbal

7.    A hegesztési eljárások kiválasztása:

  • MIG/MAG
  • PulseARC
  • Interpulse hegesztés
  • MMA/Bevont elektródás hegesztés
  • Opció: AWI/TIG DC hegesztés

    
8.    Forgatható menü gomb a menüben történő navigáláshoz és a kiválasztáshoz
    
9.    Huzal befűzés
    
10.   Gázteszt
(automatikus kikapcsolással)

Merkle HighPULSE 354/454/554 DW. A nagyteljesítményű, ipari széria!

Egyszerű használat

Egyszerű, magától értetődő kezelőfelület nagy gombokkal a komfortosabb használatért.

  • Könnyen kezelhető még kesztyűben is.
  • Jól leolvasható nagy kijelző a hegesztőáramról, feszültségről, a korrekciós értékről vagy a huzalsebességről.
  • Multifunkciós kijelző a programválasztáshoz (többnyelvű menüvel).
  • Sokoldalúan használható legyen szó műhelymunkáról, szerkezetgyártásról, ipari termelésről vagy akár hajógyártásról.
  • A praktikus függesztőrendszerrel (opció) a huzaltoló a munkaterület fölé akasztható, így könnyebb elérést biztosít a munkadarabon (see our automation components catalogue) . A gép hatóköre ezzel növelhető.

Két változat, egy kijelző – távvezérlés

1-es változat:

Minden vezérlőgomb az áramforrás frontján kap helyet, innen vezérelhető.

2-es változat:

A teljes vezérlést a huzaltoló egységen helyezzük el.

Külső vezérlőpanel MFR 20 és MRC 50

Vidd magaddal a vezérlőt közvetlenül a munkaterületre és változtasd a paramétereket.

TÖKÉLETES huzal előtolás - gyors huzalcsere!

1.    Precíz 4-görgős huzaltoló 4 hajtott görgővel.
       Huzalsebesség 0.5 – 25 m/min (model DV-26)
       vagy a nagyobb teljesítményű 0.5- 30 m/min (model DV-31). 
2.    A nagyméretű huzaltoló görgők egyenletes nyomást adnak kis huzalnyomás esetén is. 2 beszúrás 2 különböző huzalátmérőhöz
3.    Szerszám nélküli görgőcsere.  
4.    Egyszerű és gyors huzalbefűzés köszönhetően a gyorszáras mechanikának. 
5.    A pormentes huzaltoló motor állandó sebességet garantál.

6.    Euro csatlakozó a munkakábelhez, így nincs szükség átalakítóra.
7.    Huzalnyomás állítása mindkét görgőn, egyszerre.
8.    Huzalegyengető egység a stabilabb huzalvezetésért (DV-31).
9.    Oldalra nyíló panel a könnyű hozzáférésért.
10.  Egyedi tervezésű, zárt tömlő és kábelelvezetés a jobb védelem érdekében.
11.  2x4 db gumibak a stabil vízszintes vagy függőleges elhelyezéshez

Külön huzaltoló egység – hordozható, függeszthető, elforgatható, gurítható, dupla = maximális flexibilitás

Asszimetrikus elhelyezésű elfordulás

A huzaltolón hátul elhelyezett forgáspont nagyobb hatósugarat eredményez.

A huzaltoló függőleges elhelyezése

másodpercek alatt átszerelhető.

Stabil görgőkkel szerelve

felszerelhető bolygókerekekkel is.

Dupla huzaltoló DV-32 TWIN

Két különböző huzal egy hegesztőgépen, egyidőben? A DV-32TWIN huzaltoló használatával nincs többé szükség a huzalok és munkakábelek állandó cserélgetésére. Két teljesen különböző hegesztési feladat között válthat csupán a mmegfelelő munkakábel megnyomásásval. Opcióként a veztérlő a huzaltolóra is szerelhető. Szintén elérhető a bolygókerekes változat.

A kompakt HighPULSE gépek, a 284 és 354 K opcióként vízhűtéssel, kocsira szerelve is elérhetők

Kompakt, hordozható

HighPULSE energia elvitelre.

Hordozható változat, vízhűtővel

Opcióként vízhűtővel is felszerelhető.

A leginkább sokoldalú összeállítás

Palacktartós vagy akár fiókos kocsin is elhelyezhető.

Merkle HighPULSE 284/354 K. - Univerzális használatra!

A hegesztőgép műhelyeknek, összeállításra, javításra, kisebb teljesítményt igénylő feladatora gyártásba is jó választás. Könnyű, így jól mozgatható 33/36 kg. Nehezen elérhető helyeken is használható. Függesztőrendszerünkkel akár függeszthető is (opció). Minden funkció elérhető közvetlen a munkaterületen, csak a tápkábel kell csatlakoztatva legyen.

HighPULSE 454 és 554 KW műhelyekbe, termelésre, ipari felhasználásra.

Mobile with integrated water cooling

Perfect for high power and long lasting duty cicles.

Drive motor directly mounted at the torch connector

Compact and accessible wire feeder.

Robust transport handles

Easier handling and better transport safety.

MERKLE HighPULSE 454/554 KW - with wire feeder integrated at the side!

Compact and clear structure.

By developing the welding units Merkle HighPulse 454/554 KW special importance was placed on a compact and clear design. This becomes apparent due to the arrangement of the wire feeder. The entire 4-roller wire feed system DV-26 and the wire coil are integrated on the side and very easily accessible through the top-opening housing flap.

HighPULSE technology for customized use

Slim design: HighPULSE 353 K

With suspension device – perfect for use on production lines with limited work space.

Welding unit for ship building

Modified for customer needs.

Versatile accessories

From suspension devices to special trolleys.

Merkle power sources - perfect technology for automated welding processes!

With the power sources of the HighPULSE RS series Merkle offers a perfectly tuned product range for all requirements needed for the automation of welding processes.

The HighPULSE series is consisting of synergic PulseARC power sources espacially engineered for the use at robotic systems or SPS-control. It is based on a modern 100 kHz inverter power modules and a high speed 32-bit processor.

HighPULSE RS - power sources:

Typ

Schweißstrom

HighPULSE 352 RS

20 - 350 A, 60 %

HighPULSE 452 RS

20 - 450 A, 50 %

HighPULSE 552 RS

20 - 550 A, 40 %

Productivity easily improved!

Merkle Weld Factory®

Merkle Weld Factory® is the newest development from the company own software architects and shows that Merkle is keeping up with the pace of times. Communication between man and machine will be just as important in the future as the communication between the machines among themselves. Almost on a daily bases there are innovations in the field of Industry 4.0. That is why the Merkle Weld Factory® will never be just a product "out of the box", but will always be adapted to the latest developments and your requirements.

We're looking forward to introduce our solution for a huge production increase to yout company!

More precise results, faster production and verifiable quality = extensive cost reduction.

The perfect connection - Merkle HighPULSE with Merkle welding torches

TEDAC® and TEDAC® DIGITAL

Perfect control through Merkle TEDAC® welding torches.

Push-Pull torches

Significant extension of the range of action and indispensable for aluminum wires also optional with TEDAC® control. 

Functions in TIG operation

Perfect ignition with LiftTIG and continuous settings for downslope as well as gas pre- / gas post-flow time

TEDAC DIGITAL® - the digital innovation

The standard Merkle TEDAC® system is working for many years in a huge number of welding machines. For the first time the energy could be controlled and displayed directly at the welding torch via a multi-colored LED - without the need for an additional control cable.

Merkle is now entering a new level of innovation with the new system TEDAC® DIGITAL in terms of efficiency and ease-of-use. 

The energy control is carried out directly at the welding torch, the display is brand new with alphanumeric data shown in a well readable digital display on top of the torch.

These are the benefits for the user:

  •     HIGHER PRECISION due to numeric display of the welding current
  •     CLEARLY MORE EFFICIENCY due to energy control directly at the welding torch
  •     EXTREMELY MORE COMFORT thanks to an easily readable alphanumeric display
  •     MEASURABLE TIME SAVING due to ideal handling and control

With Merkle WPS/WPQR packages to EN 1090 certified results

Job packages for HighPULSE and SpeedMIG!

As one of the leading manufacturers of welding equipment, Merkle offers its customers complete WPS / WPQR packages, which all contain the respective WPQR certificates and also the required welding instructions for standard welding processes. As a welding specialist you can use these already certified welding instructions to create your own welding instructions for the welding tasks required during operation.

Ready programmed work jobs can be stored with the certified parameters inside the continuously controlled welding units of the series HighPULSE and SpeedMIG. Therefore the parameters from the WPS / WPQR manual do not need to be entered separately and are immediately available to the user upon purchase of the WPS / WPQR package.

User benefits with Merkle PulseARC technology:

  • Extremely spatter free welding due to the non short-circuit characteristics, one drop transfer:
        - tremendous time saving due to reduction of working hours for cleaning
        - high deposition rate
        - longer life of torch consumables
        - less down time due to cleaner consumables
     
  • Safe, spatter reduced ignition due to a new ignition process controlled by 13 parameters:
        - 2 independent ignition pulses
        - precise soft start of the wire
       - slag droplet is removed from the wire end at the end of each weld to ensure a safe re-ignition
     
  • Optimal processing of aluminium and aluminium alloys and stainless steel.
     
  • Optimized welding programs for:
         - different materials
         - different wire diameters
         - different protective gases
     
  • Multiple variations of pulse parameters:
        - Manipulation of the arc characteristics and the penetration.
     
  • Alloy elements are maintained due to adaption of the pulse parameters when using high alloyed wire.

Merkle HighPULSE 284/354 K. Water cooling unit and trolley!

Water cooling unit WK 300

The water cooling unit WK 300 can be used as an option. The mounting and dismounting is done in a few seconds. One pluggable electrical connection is placed on the rearof the unit.

Different applications are possible, for example: welding with a water cooled torch in the workshop or using a gascooled torch on site.

Trolley TW 110

The trolley TW 110 is designed for easy transportation of the welding unit in the workshop or on site:

  • Extra large wheels.
  • Gas bottle holder for a 10 or 20 l cylinder.
  • Lowered galvanized gas bottle holder.
  • 2 supports for torch and cables.